Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 303 Firecrest Carbon Tubeless Disc Brake 700c Rear
$975.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 303 Firecrest Tubeless Disc Brake 700c Front
$925.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 303 S Tubeless Disc Brake 700c Front
$625.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
Zipp 303 S Tubeless Disc Brake 700c Rear
$675.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
Zipp 404 Firecrest Carbon Tubeless Disc Brake Front
$1,150.00
Zipp's 404 Firecrest Tubeless Disc-brake wheels are a go-to speed weapon for any situation. Their aero and crosswind-stable 58mm rim depth is ideal for road races, time trial and triathlon, gran fondos, and endless training over all types of terrain. The 404 Firecrest Tubeless Disc brake is infused with technologies developed in our Indianapolis advanced development lab. Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 404 Firecrest Tubeless Disc-brake is a versatile and durable new hubset, the German-engineered ZR1 DB. If you had to choose just one wheel for road riding and racing, the 404 Firecrest Tubeless Disc brake is a savvy and speedy choice. - All-around aero 58mm rim depth with proven crosswind stability - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures - ZR1 DB hub is engineered in Germany with better seal design for improved durability - Superior modulation and stopping power of disc brakes - New Zipp graphics and cosmetic identity that scream speed - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 404 Firecrest Carbon Tubeless Disc Brake Rear
$1,350.00
Zipp's 404 Firecrest Tubeless Disc-brake wheels are a go-to speed weapon for any situation. Their aero and crosswind-stable 58mm rim depth is ideal for road races, time trial and triathlon, gran fondos, and endless training over all types of terrain. The 404 Firecrest Tubeless Disc brake is infused with technologies developed in our Indianapolis advanced development lab. Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 404 Firecrest Tubeless Disc-brake is a versatile and durable new hubset, the German-engineered ZR1 DB. If you had to choose just one wheel for road riding and racing, the 404 Firecrest Tubeless Disc brake is a savvy and speedy choice. - All-around aero 58mm rim depth with proven crosswind stability - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Tubeless, ensuring secure performance even when ridden at lower tire pressures - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Superior modulation and stopping power of disc brakes - New Zipp graphics and cosmetic identity that scream speed - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Sta-Tru 12-inch Rear Wheel
$32.00
Sta Tru Rear Wheel - 104mm spacing - Includes 18 tooth rear cog - Single Wall rim - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 12-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 203 / 12.5-inch - Rim Width (Internal): 24 mm - Tire Type: Clincher - Rear Axle: 5/16-inch x 104mm
Sta-Tru 20-inch Rear Wheel
$46.49 - $65.49
Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
Sta-Tru 24-inch Front Wheel
$57.99 - $62.49
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher
Sta-Tru 700c Double Wall Rear Wheel
$65.49 - $83.99
Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher
Specialized Roval Terra CLX Boost Wheelset
$2,500.00
One wheel to rule all roads. Road light, off-road tough, smooth as butter, Terra CLX BOOST wheels bring leading-edge performance to the diverse needs of mixed-terrain rides. These are the lightest gravel wheels on the market. They sport 25mm internal-width rims, deliver a durable and exceptionally smooth ride, are compatible with 28-42c tires with up to 90 PSI, 110x12 and 148x12mm thru-axle, and they come with a lifetime warranty and no-fault crash replacement. - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Right/Left: 276mm/274mm Front Drive-Side/Non-Drive: 272mm/277mm Rear - Rim Material: Advanced Carbon Composite
Specialized Roval Traverse Carbon 148 29-inch Wheelset
$1,200.00
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g
Specialized Stout XC 650b Wheelset
$275.00
650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes - Double-wall rims are strong and durable - Machined braking surface creates superior stopping power in any condition - Stainless spokes won't rust, easing long-term maintenance - 8-/9-speed cassette rear hub provides plenty of gearing options for climbing and riding the flats
Specialized Stout XC 90 Wheels
$600.00
Utilizing a 90mm wide alloy rim, sealed cartridge bearings, and butted spokes, the Stout XC 90 wheelset confidently balances lightweight with durability and quality to perform in the elements. - Single-wall alloy rims are 90mm-wide and have been mated with aggressive weight cut-outs and a hookless bead design to create a lightweight, fast-rolling wheel. - Front hub body features an alloy construction for added durability, two sealed cartridge bearings for all-weather performance, and oversized 24mm end caps. - Alloy rear hub body includes four sealed cartridge bearings for reliable, all-weather performance, as well as a lightweight alloy cassette body to keep the overall weight down. - Rear hub is convertible to be compatible with standard alloy cassette freehub body for use with 10-speed drivetrains - Lightweight butted spokes are strong and hold their tension through rough riding. - Lightweight alloy nipples hold spoke tension securely and resist rust for added durability.
Specialized Stout XC SL 29 Front
$115.00
The new Stout XC SL 29 front wheel includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.
Specialized Stout XC SL 29 Rear
$140.00
The new Stout XC SL 29 rear wheel features 141mm hub spacing and a 9mm QR axle for increased wheel stiffness and improved riding performance. It includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. QR Boost 141x9mm spacing. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.
Roval Alpinist CL Wheelset
$1,600.00
Lighten Your Bike, Not Your Wallet. Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - DT Swiss 350, Center Lock, Sealed Cartridge bearings, DT Swiss Star Ratchet internals,142x12mm thru-axle compatible - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24F and 24R - Spoke Pattern: Two-cross (1:1) Front and Rear - Spoke Type: DT Swiss Aerolite T-head - Weight: Front - 601g; Rear - 764g
Roval Alpinist CLX Front
$1,100.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 562g
Roval Alpinist CLX Rear
$1,400.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty. - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 686g
Roval CL 50 Disc Wheelset
$1,750.00
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found, until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release, 12mm endcaps, Rear quick-release, 142x12 thru-axle endcaps - Front Hub: Roval AFD1, Center Lock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Front Spoke Pattern: Two-cross/Radial (2:1) - Nipple Type: DT Swiss Pro LockBrass hexagonal - Rear Hub: Roval AFD2, Center Lock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Total Wheelset Weight: 1,515g
Roval CLX 32 Front
$1,025.00
When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For the CLX 32 clincher front, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes in order to create the best overall wheel system. This resulted in a 553-gram, 21mm-wide (internal width) front wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each CLX 32 clincher front wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 550g
Roval CLX 32 Rear Wheel
$1,375.00
When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For the CLX 32 rear clincher, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes to create the best overall system. This results in a 730-gram, 21mm-wide (internal width) rear wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each CLX 32 clincher rear wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal - Spoke Count: 24 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 730g
Roval CLX 64 Disc Front
$1,100.00
When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64, the fastest wheel that we've ever tested. Not only is it the fastest in the tunnel, but its prestige has been verified with Gold Medals in the men's road race, time trial, and team time trial at the 2016 UCI World Championships. When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64 Disc, the fastest wheel that we've ever tested with all of the performance benefits of disc brakes we have come to love. This iteration has a more impact-resistant rim, a disc-specific carbon layup that optimizes stiffness and weight, and incredible brake modulation and power in all conditions. One of the first questions we get about the CLX 64 is, "Why 64mm instead of 65mm?" To put it simply, it's because 64mm simply tested faster than 65mm. One millimeter, that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two years of development, 80 variations in rim design, and nearly 300 hours studying tire and frame interactions in the Win Tunnel, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that's nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel "slow" due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort. The rim is not the only component of the CLX 64 that contributes to its aero prowess though, in order to create the fastest wheels, we focused on the wheels as a system, not just a rim with "other parts," and our Aero Flange (AF) hubs play a significant role. Designed completely in the Win Tunnel, our AF hubs feature an incredibly small frontal aero, without sacrificing stiffness, making them aerodynamically efficient. Taking the advantage a step further, these wheels were developed to work in harmony with modern-width 24C tires. The 21mm internal rim width spreads the tire out, in this case to 26C, making it seamlessly meet the rim. Not only does this create a system with low aerodynamic drag, but one that has exceptionally low rolling resistance and inspiring grip in the corners. And to make sure we checked all of the feature boxes, we also made the rim tubeless-ready. To top off the multitude of performance features of the rim, we chose the highest quality build components to pair the CLX 64 front with. Starting with DT Swiss Aerolite bladed spokes, which test faster than their round counterparts in the Win Tunnel, we hand-lace the 64 rim to our AFD hubs that house CeramicSpeed's legendary bearings. Why hand-built? Machines make mistakes and mistakes aren't something we're ok with, so we have real people lace each wheel by hand. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve,12mm thru-axle, quick-release end caps - Front Hub: Roval AFD1, Center Lock, CeramicSpeed bearings, quick-release or 12mm thru-axle end cap - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 64mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.9mm external - Spoke Count: 21 - Spoke Pattern: Two-cross/Radial (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 735g
Roval CLX 64 Disc Rear Wheel
$1,400.00
When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64 Disc, the fastest wheel that we've ever tested with all of the performance benefits of disc brakes we have come to love. This iteration has a more impact-resistant rim, a disc-specific carbon layup that optimizes stiffness and weight, and incredible brake modulation and power in all conditions. One of the first questions we get about the CLX 64 is, "Why 64mm instead of 65mm?" To put it simply, it's because 64mm simply tested faster than 65mm. One millimeter, that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two years of development, 80 variations in rim design, and nearly 300 hours studying tire and frame interactions in the Win Tunnel, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that's nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel "slow" due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort. The rim is not the only component of the CLX 64 that contributes to its aero prowess though, in order to create the fastest wheels, we focused on the wheels as a system, not just a rim with "other parts," and our Aero Flange (AF) hubs play a significant role. Designed completely in the Win Tunnel, our AF hubs feature an incredibly small frontal aero, without sacrificing stiffness, making them aerodynamically efficient. Taking the advantage a step further, these wheels were developed to work in harmony with modern-width 24C tires. The 21mm internal rim width spreads the tire out, in this case to 26C, making it seamlessly meet the rim. Not only does this create a system with low aerodynamic drag, but one that has exceptionally low rolling resistance and inspiring grip in the corners. And to make sure we checked all of the feature boxes, we also made the rim tubeless-ready. To top off the multitude of performance features of the rim, we chose the highest quality build components to pair the CLX 64 with. Starting with DT Swiss Aerolite bladed spokes, which test faster than their round counterparts in the Win Tunnel, we hand-lace the 64 rim to our AFD hubs that house CeramicSpeed's legendary bearings and DT 240 hub internals. Why hand-built? Machines make mistakes and mistakes aren't something we're ok with, so we have real people lace each wheel by hand. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve,142x12mm thru-axlem, quick-release end caps - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AFD2, Center Lock, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Rim Depth: 64mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.9mm external - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 880g
Roval CLX 64 Front
$1,025.00 - $1,300.00
When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64, the fastest wheel that we've ever tested. Not only is it the fastest in the tunnel, but its prestige has been verified with Gold Medals in the men's road race, time trial, and team time trial at the 2016 UCI World Championships. One of the first questions we get about the CLX 64 is, "Why 64mm instead of 65mm?" To put it simply, it's because 64mm simply tested faster than 65mm. One millimeter, that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two years of development, 80 variations in rim design, and nearly 300 hours studying tire and frame interactions in the Win Tunnel, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that's nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel "slow" due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort. The rim is not the only component of the CLX 64 that contributes to its aero prowess though, in order to create the fastest wheels, we focused on the wheels as a system, not just a rim with "other parts," and our Aero Flange (AF) hubs play a significant role. Designed completely in the Win Tunnel, our AF hubs feature an incredibly small frontal aero, without sacrificing stiffness, making them aerodynamically efficient. Taking the advantage a step further, these wheels were developed to work in harmony with modern-width 24C tires. The 21mm internal rim width spreads the tire out, in this case to 26C, making it seamlessly meet the rim. Not only does this create a system with low aerodynamic drag, but one that has exceptionally low rolling resistance and inspiring grip in the corners. And to make sure we checked all of the feature boxes, we also made the rim tubeless-ready. To top off the multitude of performance features of the rim, we chose the highest quality build components to pair the CLX 64 front with. Starting with DT Swiss Aerolite bladed spokes, which test faster than their round counterparts in the Win Tunnel, we hand-laced the 64 rim to our AF hubs that house CeramicSpeed's legendary bearings. Why hand-built? Machines make mistakes and mistakes aren't something we're ok with, so we have real people lace each wheel by hand. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 64mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.9mm external - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 695g
Roval CLX 64 Rear Wheel
$1,400.00 - $1,500.00
When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64, the fastest wheel that we've ever tested. Not only is it the fastest in the tunnel, but its prestige has been verified with Gold Medals in the men's road race, time trial, and team time trial at the 2016 UCI World Championships. One of the first questions we get about the CLX 64 is, "Why 64mm instead of 65mm?" To put it simply, it's because 64mm simply tested faster than 65mm. One millimeter, that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two years of development, 80 variations in rim design, and nearly 300 hours studying tire and frame interactions in the Win Tunnel, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that's nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel "slow" due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort. The rim is not the only component of the CLX 64 that contributes to its aero prowess though, in order to create the fastest wheels, we focused on the wheels as a system, not just a rim with "other parts," and our Aero Flange (AF) hubs play a significant role. Designed completely in the Win Tunnel, our AF hubs feature an incredibly small frontal aero, without sacrificing stiffness, making them aerodynamically efficient. Taking the advantage a step further, these wheels were developed to work in harmony with modern-width 24C tires. The 21mm internal rim width spreads the tire out, in this case to 26C, making it seamlessly meet the rim. Not only does this create a system with low aerodynamic drag, but one that has exceptionally low rolling resistance and inspiring grip in the corners. And to make sure we checked all of the feature boxes, we also made the rim tubeless-ready. To top off the multitude of performance features of the rim, we chose the highest quality build components to pair the CLX 64 with. Starting with DT Swiss Aerolite bladed spokes, which test faster than their round counterparts in the Win Tunnel, we hand-laced the 64 rim to our AF hubs that house CeramicSpeed's legendary bearings and DT 240 hub internals at the rear. Why hand-built? Machines make mistakes and mistakes aren't something we're ok with, so we have real people lace each wheel by hand. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 64mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.9mm external - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 850g
Roval Control 29 Carbon 6B XD Wheelset
$1,350.00
WHAT IT'S FOR, WHY IT'S GREAT From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents—a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. ASYMMETRY BEGETS SYMMETRY The asymmetric design of the Control rim offers some subtle but important benefits. With the spokes offset to one side of the rim, this allows us to reduce the spoke offset that usually occurs at the hub. In turn, this means we can generate greater bracing angles for the spokes between the hub and rim, while also minimizing the spoke tension differential that often occurs between drive- and non-drive side spokes. The end result is a wheel that is stronger, laterally stiffer, more durable, and in the case of the Control, allows us to utilize the same length spoke throughout the whole wheelset. MINIMUM WEIGHT, MAXIMUM DURABILITY, EASY SERVICEABILITY Striking a no-hassle balance between low weight and low maintenance, we chose DT Swiss 350 Classic hubs (15x110mm thru-axle front, 12x148mm thru-axle rear) as the basis for the Control Carbon wheels. With sealed bearings, a notoriously durable 36-tooth ratchet, and 28 spokes front and rear, dependability is assured. QUALITY THROUGHOUT, FROM HUB TO SPOKE TO NIPPLE TO RIM There is absolutely no point in laying up an awesome rim and pairing it with a quality hub, only to skimp on spokes and nipples. So, keeping strength and dependability foremost in our minds, we opted to hold the Control Carbon wheel together with the best: DT Swiss Competition Race spokes and alloy Pro Lock nipples.
Roval Control SL 29 6B Wheelset
$2,500.00
Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp-handling, smooth-riding, extra-durable, and 22% less likely to pinch-flat your tires—in addition to being some of the lightest-weight production wheels on the planet. - Front Hub: Alloy body, SiNC Ceramic Bearings, 15 x 110mm thru-axle, 19 and 31mm OD end cap options included - Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 54T quick engagement ratchet system cassette, includes SRAM XX1 11-speed freehub and 148 end caps - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design (Not compatible with tire inserts) - Rim Width: 29mm internal - Spokes: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross, Front & Rear - Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14 x 2.0mm - Max Rotor Size: 200mm - System Weight Limit: 275lbs / 125kg - Total Wheelset Weight: 1240g
Roval Rapide C 38 Boost Disc Wheelset
$1,200.00
Performance Upgrade Made Easy The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.
Roval Rapide C 38 Disc Wheelset
$1,099.99
Performance Upgrade Made Easy The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.
Page 1 of 7 Next page